To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins CM1 S2 and is the answer not in the manual?
General| Product color | White |
|---|---|
| Housing material | - |
| Recommended usage | Universal |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Speaker type | 2-way |
| Tweeter diameter | 25 mm |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Driver diaphragm material | Kevlar |
| Mid-range driver diameter | 130 mm |
| Number of tweeter drivers | 1 |
| Tweeter diameter (imperial) | 1 \ |
| Mid-range driver diameter (imperial) | 5 \ |
| Recommended amplifier power (max) | 100 W |
| Recommended amplifier power (min) | 30 W |
| Impedance | 8 Ω |
| Sensitivity | 84 dB |
| Frequency range | 50 - 28000 Hz |
| RMS rated power | - W |
| Crossover frequency | 4000 Hz |
| Total Harmonic Distortion (THD) | 1 % |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 276 mm |
|---|---|
| Width | 165 mm |
| Height | 280 mm |
| Weight | 6700 g |
