Need help?Do you have a question about the Bowers & Wilkins 703 S2 and is the answer not in the manual?
General| Type | Floorstanding speaker |
|---|---|
| Impedance | 8Ω (minimum 3.1Ω) |
| Recommended Amplifier Power | 30W - 200W into 8Ω on unclipped programme |
| Finish | Gloss Black, Satin White, Rosenut |
| Drive units | 1x ø25mm (1in) Decoupled Carbon Dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil Profile bass |
| Frequency Response | 46Hz - 28kHz (±3dB) |
| Sensitivity | 89dB spl (2.83V, 1m) |
| Harmonic Distortion | <1% 100Hz - 22kHz (90dB, 1m) |
| Dimensions | 200mm (W) |
Lists all items included in the speaker packaging for verification.
Details the product's compliance with international directives like RoHS and WEEE.
Instructions for mounting speakers using spikes or rubber feet for stability.
Guidance on optimal speaker placement for stereo and home theatre systems.
Advice on keeping magnetically sensitive items away from speakers.
Explains how to connect speakers using linked terminals for conventional or bi-wiring.
Ensures correct positive/negative connections and advises on speaker cable choice.
Methods to adjust bass volume using speaker position or foam plugs.
Addresses uneven bass frequency due to listening room acoustic properties.
Explains how speaker performance changes during the initial listening period.
Instructions for cleaning cabinet surfaces without damaging finishes.
Guidance on maintaining wood veneer finish and preventing cracking.
To Next Page