Need help?Do you have a question about the Bowers & Wilkins CM9 S2 and is the answer not in the manual?
General| Product color | White |
|---|---|
| Housing material | - |
| Recommended usage | Universal |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Speaker type | 3-way |
| Woofer diameter | 165 mm |
| Tweeter diameter | 25 mm |
| Number of drivers | 4 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Number of woofer drivers | 2 |
| Driver diaphragm material | Kevlar |
| Mid-range driver diameter | 150 mm |
| Number of tweeter drivers | 1 |
| Woofer diameter (imperial) | 6.5 \ |
| Tweeter diameter (imperial) | 1 \ |
| Mid-range driver diameter (imperial) | 6 \ |
| Recommended amplifier power (max) | 300 W |
| Recommended amplifier power (min) | 30 W |
| Impedance | 8 Ω |
| Sensitivity | 89 dB |
| Frequency range | 46 - 28000 Hz |
| RMS rated power | - W |
| Crossover frequency | 4000 Hz |
| Total Harmonic Distortion (THD) | 1 % |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 370 mm |
|---|---|
| Width | 320 mm |
| Height | 1025 mm |
| Weight | 26600 g |
The speakers are intended to be floor mounted only. It is important to ensure that the speakers stand firmly on the floor using the spike feet supplied whenever possible. In addition, fit the plinth for proper stability.
To begin with, the speakers should be positioned between 1.5m and 3m apart at two corners of an equilateral triangle completed by the listening area at the third corner. The speakers should be approximately 0.5m away from the back wall, and at least 0.5m away from any side walls.
If the speakers are to be used for the front channels in a home theatre system, they should be placed closer together than for 2-channel audio, because the surround channels tend to widen the image.
The speaker drive units create stray magnetic fields that extend beyond the boundaries of the cabinet. We recommend you keep magnetically sensitive articles at least 0.5m from the speaker.
To Next Page