Bowflex Dumbbell Stand User Manual

Assembly Manual
Dumbbell Stand
®
®

Bowflex Dumbbell Stand Specifications

General

Material	Steel
Assembly Required	Yes
Color	Black
Compatible Models	Bowflex SelectTech 552 and 1090 Dumbbells
Features	Ergonomic design

Summary

Important Safety Instructions

Safety Warning Labels and Serial Number

Specifications

Parts

Hardware Guide

Tools

Assembly Steps

Step 1: Attach Stabilizers to Stand Legs

Attaches the rear stabilizers to the main stand legs, noting to not fully tighten hardware.

Step 2: Install Bottom Cross Brace

Installs the bottom cross brace, ensuring the narrower edge faces the stand leg uprights.

Step 3: Install Center Plate

Installs the center plate, ensuring correct orientation, and tightens all previous hardware.

Step 4: Install Dumbbell Platforms

Installs the dumbbell platforms, ensuring screw holes face the center of the stand.

Step 5: Install Towel Bar

Installs the towel bar and tightens all hardware completely.

Step 6: Attach Hold Down Straps

Attaches the hold down straps to the dumbbell platforms, ensuring snaps are securely fastened.

Step 7: Apply Labels and Record Serial Number

Applies safety warning labels and records the serial number for future reference.

Step 8: Final Inspection

Inspects the equipment for tightness, levelness, and correct assembly, and attaches dumbbells.

Maintenance