Need help?Do you have a question about the Bowmonk BrakeCheck Series 2 and is the answer not in the manual?
General| Brand | Bowmonk |
|---|---|
| Model | BrakeCheck Series 2 |
| Category | Test Equipment |
| Language | English |
Ensures battery charge, selects level test area, and positions unit correctly for testing.
Details the procedure for selecting the Service Brake Test mode and initiating the test.
Explains how to access and interpret the results of a Service Brake Test.
Details the procedure for selecting the Hand Brake Test mode and initiating the test.
Explains how to access and interpret the results of a Hand Brake Test.
Instructions for viewing the unit's current temperature in Celsius or Fahrenheit.
Procedures for connecting a printer via cable and outputting test results.
Procedures for connecting a printer via Infra-Red link and outputting test results.
This is the maximum recorded G Force (m/s2) detected during the test, in the front to rear direction.
This refers to the average G Force (m/s2) over the duration of the test., in the front to rear direction.
This is the maximum recorded G Force (m/s2) detected during the test, in the left or right direction.
This is an indication of the direction from centre the vehicle is deviating toward during the test.
This is an estimate of the distance the vehicle travels from commencement of braking to complete stop.
This is an estimate of the speed at which the vehicle was travelling when braking was commenced.
This is an expression of braking performance (%).
To Next Page
