Technical specifications Pro-Ject Phono Box E
* typical for MM or high output MC cartridges
Input capacitance/input impedance, MM: 47kohms/120pF
*
Gain: 40dB
Output voltage typically: 500mV/1kHz at 5mV/1kHz
Noise floor: 88dB (A weighted)
THD: <0,05%
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,5dB
Input: 1 pair RCA/phono sockets
Line-level output: 1 pair RCA/phono sockets
Outboard power supply: 18V/500mA DC
Power consumption: 20mA DC
Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mm
Weight: 269g without power supply
Potential incorrect use and fault conditions
No signal on one or both channels:
No connection between player and phono amplifier or amplifier. This could be due to a faulty plug,
broken wire or solder joint or simply loose plug/socket connection.
Strong hum:
No earth connection from cartridge or arm, or arm cable to phono amplifier, or earth loop.
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Warranty
To Previous Page
Loading...
