Need help?Do you have a question about the Box-Design PRO-JECT TUNER BOX S and is the answer not in the manual?
General| Brand | Box-Design |
|---|---|
| Model | PRO-JECT TUNER BOX S |
| Category | Tuner |
| Language | English |
Connects the tuner's line level output to an amplifier's input.
Connects any antenna cable with a co-axial DIN-plug or US-model F-plug.
Enables remote switching via a trigger signal from a Pro-Ject pre-amplifier.
Connects the unit to the mains supply using the provided power adapter.
Toggles unit standby and activates/deactivates mute using ON/OFF button.
Adjusts the sound volume using the VOL- and VOL+ buttons.
Selects manual or automatic program search modes using the OK button.
Manually tunes reception frequency in 50kHz steps using TUNE buttons.
Starts automatic frequency scan up/down using CH+ and CH- buttons.
Selects stored radio programs using memory buttons M1-M8 and CH+/-.
Stores tuned frequencies into memory positions, overwriting existing ones.
Controls auto scan start, confirmation, clearing, and station memory during scanning.
Toggles the tuner between operational status and standby mode.
Adjusts display brightness and colour settings via the set-up menu.
To Next Page