BOXER 63.002 - Unpacking and Contents; Product Functions; Assembly Instructions

 Unpacking
Carefully remove the machine from its packaging and check that you have
removed all the parts.
Contents:
Motor - Full installation set - 3 x rails 2 x sleeves for rails -
Complete chain drive - 2 x remote controls - User Manual
Functions:
• Automaticlight
Light remains on for 3 mins. after opening and switches off automatically.
• Doorspeedreducesasitapproachesendofopening/closing
Quiet and soft start, slow stop protect motor and ensure long service life.
• Automaticstop
Door movement stops if it encounters an object, and door reverses a short
distance.
• Programmableraise/lowerpowerandlength
Power can be regulated according to a scale of 1-9, where 9 is the maximum
(800N).
Chain length can be set during programming.
• Programmableautomaticclosefunction
Can be set to close automatically after a given period.
• Manualopen/closeswitchcanberetro-tted
(Optional extra - see separate item)
• Remotecontrolx2pcs.
A single button for open, stop and close
 Functions
 Assemblyinstructions
Check distance from door leaf to ceiling before installation.
Minimum 5 cm between door and ceiling for full length of operating range.
Where distance to ceiling exceeds 14 cm, door opener must be suspended
from ceiling using bracket supplied.
Where distance to ceiling is less than 5 cm, please contact Millarco’s service
department.