Boxx Meridian - Page 11

UK Head Office: +44 (0)845 643 2874 z Fax: +44 (0)207 900 6350 z www.boxx.tv z sales@boxx.tv
QUICK SET UP FOR STANDARD OPERATION
Transmitter Setup
Note: Please refer to the Receiver setup, prior to conguring the Transmitter
• Mountingonthecamera
• Antennasmounting
• Poweringuptheunit
• Inputs(Signal)
• Menusettings
1. Mounting on camera
TransmittercanbemountedusingV-LokorAntonBauerbatteryplates,oryoucanalsohaveanoplatetransmitter,whichyoucanpowerupusing4Pinhirose
cable.
2. Antennas mounting
Forstandardoperation,only4antennas(ANT104)areneededontheTransmitter.
3. Inputs (signal and audio)
PleaseusetheBNCcablestoconnectcameratothetransmitter,ifusingSD-SDIorHD-SDIsignal,theaudiofromcamerawillbeembedded,whenusingCompos-
iteorComponentinput,youneedtoplugtheaudiocableintoyourtransmitter.
4. Menu settings
YouturnonorofftheTransmitterbyholding*buttononthekeypad.Press“E” toenterthemenu,andselecttheinputyouwanttouse.Thetransmitteralsohas
atestpatternsignalwhichisat720p.Afterselectingtheinputmethod,youcanpress*buttontogobacktothemainscreen,whereyoucanselectfrequnecy,by
pressingUpandDownbuttonsontherightsideofthescreen.