NOTE: Please charge the transmitter when TX indicates low battery status,
or it will automatically shut o within 10 minutes.
Power Button
• Press and hold for 2 seconds to power on or o.
• Press to mute or unmute the microphone.
• Press and hold for 5 seconds to enter the pairing state in shutdown mode.
Noise Cancellation Button
Press to enable or disable the noise cancellation.
Record Button
Press to enable or disable the onboard recording.
Magnetic Belt Clip
Mic/ Line Input Toggle
USB-C Charging Port
Used for charging. After connecting a laptop or smartphone, can also be
used to read the recording files.
Charging Contacts
3
4
Receiver
1
2
5
6
7
8
9
11
12 13
10
To Next Page
Loading...
