Need help?Do you have a question about the Boya BY-BM6060 and is the answer not in the manual?
The main body of the microphone, housing the sound capture elements.
An indicator light showing the operational status of the microphone.
A switch to control the high-pass filter for low-frequency noise reduction.
The connector for audio output, typically used with professional audio equipment.
An accessory designed to isolate the microphone from vibrations.
A foam cover to reduce wind noise and protect the microphone capsule.
A furry cover for enhanced wind noise reduction in outdoor conditions.
Step-by-step instructions for inserting an AA battery into the microphone.
Highlights of the microphone's capabilities and design.
Detailed technical data including polar pattern, frequency response, and sensitivity.
General| Type | Long gun microphone |
|---|---|
| Voice coil type | Condenser |
| Pass filter switch | 150 Hz |
| Microphone frequency | 60 - 20000 Hz |
| Microphone sensitivity | 36 dB |
| Microphone direction type | Supercardioid |
| Device interface | mini XLR (3-pin) |
| Connectivity technology | Wired |
| Product color | Black |
| Housing material | Aluminum |
| Package type | Hanging box |
| Carrying case | Yes |
| Battery type | AA |
| Power source | Battery |
| Battery voltage | 1.5 V |
| Number of batteries supported | 1 |
| Impedance | 200 Ω |
Weight and Dimensions| Microphone weight | 129 g |
|---|
To Next Page
