USER’S MANUAL
Model: VTK380HD
EMBEDDED STYLE
1. BILL OF MATERIAL
Camera
2. SPECIFICATION
• High sensitive 1/4” HD Color CMOS Sensor
(1089)
• Reverse/ Non-reverse image selectable
• Parking guide line on/o selectable
• Waterproof (IP67)
• 170° wide viewing angle
• Super sensitive low Lux performance
• 12VDC (Tolerance 9V ~ 16V)
• Chipset 1089 HD
• Pixel: NTSC/PAL 800x533
• 0.05 Lux
3. WIRING
For technical support contact 888-941-3060 or email info@visiontechamerica.com
WWW.VISIONTECHAMERICA.COM
4. Installation Tip
To monitor
To monitor
Ground
Ground
12VDC Rear Lamp
12VDC Rear Lamp
Camera
Camera
Video
Video
White
Blue
Cut loop to disable grid line
Cut loop for non-mirror image
If using the camera as front
camera, cut the white loop
to get non-mirror image.
If using the camera as rear
view camera, do not cut the
white loop.
Cut the blue loop to turn o
the parking assist grid lines.
1. Select suitalbe at position
near the license plate light
and mark it.
2. Drill a hole according to the
the camera diameter
3. Mount the camera into the
hole using your two thumbs to
press it evenly for tight and at
mounting
4. Read section #3 for wiring
help.
Manual Power Plug
Holesaw 24’ Male to male
RCA cable
Allen Key
Need help?
General
