This document is an instruction manual for the BOYO Slim Rear View Camera, covering models VTL275LTJ, VTL375LTJ, VTL405LTJ, and VTL425LTJ. It provides comprehensive information on the product's features, specifications, installation, and care.
Function Description:
The BOYO Slim Rear View Camera is designed to enhance visibility for drivers, particularly when reversing or for use as a front camera. It provides a clear video feed to a car's LCD display or navigation system, aiding in parking and maneuvering. The camera offers selectable image orientation (reverse/non-reverse) and trajectory parking lines, which can be turned on or off to suit user preference. Its wide viewing angle and low light performance ensure effective operation in various conditions.
Important Technical Specifications:
- Image Sensor: 1/3" CMOS Color Image Sensor
- Resolution: 960(H) x 480(V) effective pixels, 700 TV Lines horizontal resolution
- Total Pixels: NTSC: 460K
- Minimum Illumination: 0 Lux at F2.0
- Lighting: Dual 3W LED lights for excellent night vision
- Viewing Angle: 175 degrees wide (D)
- Video Output: 1Vp-p 75 ohm composite
- S/N Ratio: More than 48dB
- Electronic Iris: 1/50, 1/60 - 1/100,000 sec
- Gamma Correction: r=0.45
- White Balance: Auto, 2100K-9100K
- Gain Control: Auto, 4dB-30dB
- Lens Mount: 1.56mm Board lens
- Power Source: Car Electric Source DC12V (Tolerance: 9VDC-16VDC) with built-in transient impulse protection circuit
- Operating Current (LED OFF): 70mA w/regulated power in
- Operating Temperature: -4°F to 122°F (-20℃ to +50℃)
- Storage Temperature: -40°F to 176°F (-40℃ to +80℃)
- Humidity: Up to 90% RH (non-condensing)
- Waterproof Rating: IP68
- Cable: 24ft Video Extension Cable
- System: NTSC
- Camera Swivel: Up and Down
- Weight (Approx.):
- VTL275LTJ / VTL375LTJ: 454.7g
- VTL405LTJ / VTL425LTJ: 243.7g
Usage Features:
The camera offers several customizable features for optimal user experience:
- Image Orientation: Users can select between reverse and non-reverse image modes. This is controlled by cutting or not cutting a white loop during installation. Cutting the white loop configures the camera for front camera use, while leaving it uncut is for reverse camera use.
- Parking Lines: Trajectory parking lines can be toggled on or off. This is controlled by cutting or not cutting a blue loop during installation. Cutting the blue loop disables parking lines.
- LED Lights: The dual 3W LED lights for night vision can be connected or left unconnected, depending on whether the user requires LED illumination. This is controlled by connecting or not connecting a green wire.
- Camera Swivel: The camera itself can be swiveled up and down, allowing for adjustment of the viewing angle after installation.
- Models: The manual covers two main types of packages: VTL275LTJ/VTL375LTJ, which appear to be license plate frame cameras, and VTL405LTJ/VTL425LTJ, which are slim bar-type cameras. Both types include necessary mounting hardware, an instruction manual, an adaptor cable, a 24ft extension cable, and warranty/registration cards.
Maintenance Features:
- Cleaning: To maintain the camera's brilliant luster, it is recommended to periodically clean the mounting frame using a non-abrasive mild soap detergent and water only.
- Warranty: The product comes with a limited time warranty, which applies only if care instructions are followed regularly. In case of a defective product or workmanship, the item should be returned to the place of purchase.
- Durable Design: The camera features a "beautiful design & anti-scratch coating" which protects the finish, contributing to a long-lasting appearance and reducing the need for frequent maintenance. The IP68 waterproof rating also ensures durability against environmental elements.
Need help?
General
To Next Page