Need help?Do you have a question about the Bpt Agata C 200 and is the answer not in the manual?
General| Brand | Bpt |
|---|---|
| Model | Agata C 200 |
| Category | Intercom System |
| Language | English |
Modifying the BP1 wire link to activate the door open button when the receiver is up.
Housing for optional auxiliary function button (8) for AGATA P1.
Identification and function of various terminal connections on the device.
Specifies the storage and operating temperature ranges for the device.
Details the Ingress Protection (IP) rating of the equipment.
Guidelines for cleaning the terminal using soft cloths and water only.
Instructions for removing SW11 jumper to activate door open button with receiver up.
Details on enabling and disabling intercommunication and conversation secrecy.
Summary of technical features including voltage, absorption, and dimensions.
Step-by-step guide for transferring calls between extensions and the entry panel.
Details the functions of the power supply unit, including transformer capacity and call generation.
Summary of technical data including supply voltage, power, output voltages, dimensions, and IP rating.
Components associated with the HTS accessory line.
Components associated with the KHPS accessory line.
Components associated with the HBP accessory line.
Components associated with the KHPD accessory line.
Plates used for securing cables during installation.
Plugs used to cover holes during installation.
Cautionary note on safely removing the microphone from its seat.
Warning regarding the front plate's common call feature for micro-contacts.
Instructions for inserting the audio module near the chassis top moulding.
Caution on safely removing the microphone from its seat during wall mounting.
Note on the front plate's common call for micro-contacts in wall mounting.
Instruction to place the cable clamp plate near the audio module.
Instructions for removing and filling the name card for personalization.
Procedure for closing the cover plate using a specific tool and screw.
Instructions for installing units side-by-side on a wall.
Adjustments for loudspeaker and microphone audio levels.
Detailed description and function of each terminal on the unit.
Technical specifications including power, voltage, operating temperature, and IP rating.
Instructions for proper disposal of packing material and the equipment.
To Next Page
