Need help?Do you have a question about the Bpt System 200 Audio O&M and is the answer not in the manual?
Details the technical specifications of the audio module including voltage and temperature.
Explains the purpose of each terminal connection on the audio module for installation.
Describes the menu structure for programming the HAC/200 entry panel, including options and settings.
Covers the technical characteristics and terminal functions of the HAC/200 entry panel.
Details installation procedures and the operation of buttons for calling users on the HAC/200 panel.
Explains the terminal functions for both relay and call adapter modes of the VLS/101.
Details the technical specifications of the VLS/101 module, including voltage and current ratings.
Explains how to set jumpers and potentiometer P1 for controlling the relay timing and source.
Details the terminal connections for the VLS/100C relay unit's power and signal inputs.
Provides the technical specifications of the VLS/100C relay unit, including supply voltage and dimensions.
Guides on programming the VSB/200C for one block, a range of codes, or a single call.
Guides on resetting, setting day/time, and programming ON/OFF times for the TT/2 timer.
Guides on programming the CD/200, including code entry, jumper settings, and call note types.
Guides on programming the CD/204, including code assignment and call note generation.
Details the technical specifications of the audio module including voltage and temperature.
Explains the purpose of each terminal connection on the audio module for installation.
Describes the menu structure for programming the HAC/200 entry panel, including options and settings.
Covers the technical characteristics and terminal functions of the HAC/200 entry panel.
Details installation procedures and the operation of buttons for calling users on the HAC/200 panel.
Explains the terminal functions for both relay and call adapter modes of the VLS/101.
Details the technical specifications of the VLS/101 module, including voltage and current ratings.
Explains how to set jumpers and potentiometer P1 for controlling the relay timing and source.
Details the terminal connections for the VLS/100C relay unit's power and signal inputs.
Provides the technical specifications of the VLS/100C relay unit, including supply voltage and dimensions.
Guides on programming the VSB/200C for one block, a range of codes, or a single call.
Guides on resetting, setting day/time, and programming ON/OFF times for the TT/2 timer.
Guides on programming the CD/200, including code entry, jumper settings, and call note types.
Guides on programming the CD/204, including code assignment and call note generation.
General| Brand | Bpt |
|---|---|
| Model | System 200 Audio O&M |
| Category | Intercom System |
| Language | English |
To Next Page
