Need help?Do you have a question about the Bpt VSI/200 and is the answer not in the manual?
General| Brand | Bpt |
|---|---|
| Model | VSI/200 |
| Category | Intercom System |
| Language | English |
Explains the purpose and connection of each terminal on the HA/200 audio module.
Outlines the technical specifications, including supply voltage and operating temperature for the HA/200.
Describes the features and capabilities of the HAC/200 coded-call entry panel.
Highlights key functionalities and design aspects of the HAC/200 panel.
Explains the role of each terminal connection point on the HAC/200 unit.
Lists technical specifications such as display type and supply voltage for the HAC/200.
Details the operational purpose of each button used for user calls on the HAC/200.
Guides visitors on how to use the entry panel's keypad and display interface.
Explains the process of searching for and initiating calls to users via the entry panel.
Describes the specific functions assigned to each button during programming.
Details how to add, modify, or delete user entries within the system.
Explains the use and configuration of service and secret codes for system access.
Details procedures for exporting, importing, and deleting memory contents.
Describes how to copy memory between two HAC/200 units.
Explains the terminal connections for the VLS/101 relay module.
Lists specifications like supply voltage, current demand, and temperature range.
Describes the settings and configurations for the VLS/100C relay unit.
Details the terminal connections for the VLS/100C relay unit.
Outlines the technical specifications of the VLS/100C unit.
Explains the operational features and protection mechanisms of the SI/200 selector.
Details the terminal connections for the SI/200 entrance selector.
Lists the technical specifications, including supply voltage and dimensions.
Covers procedures for programming one block, progressive codes, and single calls.
Explains the terminal connections for the VSB/200C block selector.
Lists the technical specifications and operational limits.
Outlines the key features and capabilities of the TT/2 timer.
Provides procedures for testing the functionality of the TT/2 timer.
Details the steps required to reset the timer's programming and settings.
Guides on setting the current day and time on the TT/2 timer.
Explains how to program the ON and OFF time slots for the timer.
Step-by-step guide to accurately set the day and time on the timer.
Instructions for configuring the initial ON time for the timer.
Instructions for configuring the initial OFF time for the timer.
Lists the primary functions of the A/200R power supplier.
Details the terminal connections for the A/200R power supplier.
Explains the terminal connections for the C/200 and XC/200 handsets.
Outlines the technical specifications for both handset models.
Guides on how to install the E/220 twin channel receiver.
Details the terminal connections for the VAS/100.30 power supplier.
Lists specifications like mains supply, output voltage, and dimensions.
Explains terminal and wire connections for the CD/200 unit.
Details the steps for programming the CD/200 coder/decoder.
Lists specifications including supply voltage and dimensions.
Details the terminal connections for the CD/204 floor coder/decoder.
Outlines the procedure for programming the CD/204 unit.
Lists specifications such as supply voltage and dimensions.
Explains the operation and configuration of the door-lock release button.
Details the terminal connections for the YC/200 and YC/200A handsets.
Guides on how to connect the YPL unit to the receiver.
Explains the terminal connections for the NC/220 module.
Lists specifications like switching power and temperature range.
Guides on how to install the NC/221 hands-free modules.
Details the terminal connections for the BC/200 call booster.
Lists specifications like supply voltage and dimensions.
Explains the terminal connections for the AS/200 power supplier.
Lists specifications like mains supply and output voltages.
Explains operational features like sequential selection and signal regeneration.
Details the terminal connections for the VSI/200 selector.
Describes the impact of different SW jumper settings on the VSI/200.
Explains operational features like system activation timers and call note generators.
Details the terminal connections for the VA/200 power supplier.
To Next Page
