BpTRU Operator’s Manual
26
1. Connect a blue temperature probe to
the BpTRU if it is not already
connected.
2. Take a disposable probe sheath from
the packaging box.
3. Separate the tabs on the sheath and
insert the probe.
4. Slide the full length of the probe into
the sheath.
5. Hold the sheath tab and the probe
with one hand and, while twisting,
pull the probe and sheath out of the
packaging.
6. Check that the sheath fully covers the
probe and is secure. If not, discard
the sheath and repeat the steps above.
To Next Page
Loading...