BpTRU BPM100 - Page 39

Display Reference
33
Symptoms
Possible Causes
Corrective Actions
Power is on and E15
displays when BP
Start or Temperature
Start button is pressed.
Battery is low.
Plug BpTRU into a
wall outlet to charge
the battery.
Monitor turns off
automatically and
cannot restart when
power applied.
Blown fuse.
Contact BpTRU
Customer Support.
No power (green
indicator light is off).
Power supply is not
plugged into wall
outlet.
Plug power supply
into wall outlet.
Power supply is not
plugged into BpTRU.
Plug power supply
into BpTRU.
Wall outlet is not
powered.
Have qualified
technician inspect wall
outlet and power
breaker.
Battery is fully
discharged.
Plug BpTRU into wall
outlet to charge the
battery.
Power supply is
plugged in properly
and power indicator
light does not turn on
with power switch.
Have qualified
technician inspect
output of power
supply.
Undetermined causes.
Contact BpTRU
Customer Support.
All displays remain lit
on power up.
BpTRU is not
powered down
properly.
Turn power off, wait
10 seconds, and turn
power on again.