BpTRU BPM100 - Page 53

Display Reference
47
WARNING
Do not use a metal tool to install or remove a battery.
The terminals may short and lead to an electrical
safety hazard.
1. Insert the output plug of the DC
universal input power supply into
the power receptacle on the BpTRU.
2. Plug the cord set into the universal
power supply.
3. Insert the cord set plug into an AC
wall outlet. The charging indicator
should now be lit indicating that the
battery is charging.
On initial setup of your BpTRU, charge the
battery for at least 12 hours.