Brabantia BBEK1111 User Manual (English)

Questions and Answers:

J
Joseph RamosJul 30, 2025
What to do if my Brabantia BBEK1111 Food Processor suddenly stops?
- R
  rcoxJul 30, 2025
  If your Brabantia Food Processor suddenly stops, it might be because the lid of the bowl came undone during a heavy processing task. Ensure the lid is properly closed to resume operation. Alternatively, the appliance may be overheating. If this is the case, turn the control knob to OFF, unplug the appliance, and allow it to cool down to room temperature before plugging it back in and processing smaller batches.
M
Mark SullivanAug 3, 2025
Why does my Brabantia BBEK1111 motor smell during processing?
- T
  Tony LinAug 3, 2025
  A new Brabantia Food Processor motor may produce a smell or emit some smoke during the first few uses; this is normal and should stop after a few uses. If the appliance has been used continuously for an extended period, it may also give off a smell or emit smoke. If this occurs, switch off the appliance and let it cool down for 60 minutes.
H
Hannah SalasAug 7, 2025
What to do if the Brabantia BBEK1111 blender leaks?
- M
  Matthew WattsAug 7, 2025
  If your Brabantia Food Processor blender leaks, immediately switch off the appliance and pour out the ingredients. Then, remove the blade unit interface and check if the sealing ring has been properly assembled on the blade unit.
J
Judy SheltonAug 11, 2025
What should I do when the blade unit or motor of my Brabantia BBEK1111 gets blocked during processing?
- C
  Cynthia ColeAug 11, 2025
  If the blade unit or motor of your Brabantia Food Processor gets blocked during processing, switch off the appliance. Use a spatula to carefully dislodge any ingredients blocking the blade unit. For best results, process ingredients in smaller quantities.
P
Patricia HoweAug 15, 2025
Why does the ICE function not work on my Brabantia Food Processor?
- M
  Misty NguyenAug 16, 2025
  If the ICE function on your Brabantia Food Processor isn't working, make sure to first turn the control knob to the ON position, and then push the ICE button.