Bradford White RE120U6-1NAL User Manual (English)

Questions and Answers:

Z
Zachary MayAug 10, 2025
Why is there no hot water from my Bradford White Water Heater?
- M
  Mrs. Emily Juarez DVMAug 10, 2025
  If your Bradford White Water Heater isn't producing any hot water, the issue might stem from several causes. First, check the fuses or circuit breakers in your service panel to ensure the heater is receiving power. Next, inspect all wire connections for any looseness. It's also possible that the upper heating element or thermostat is inoperative, requiring a check and potential replacement. Finally, examine the ECO and reset or replace the thermostats if necessary.
L
Lisa RiveraAug 15, 2025
What to do if my Bradford White Water Heater doesn't have enough hot water?
- B
  Brandon AllenAug 16, 2025
  If your Bradford White Water Heater isn't providing enough hot water, several factors could be the cause. Start by checking the lower heating element and replace it if needed. Ensure the thermostat is set to an appropriate temperature. Inspect all wire connections for looseness. Remove the heating element(s) to check for sediment or lime buildup. Reduce hot water demand during high usage periods. If the issue persists, consider that the heater might be undersized or that the inlet water is very cold. Also, check for reversed plumbing connections or a damaged dip tube, correcting or replacing them as necessary.
L
Lawrence AndersonAug 22, 2025
How to fix slow hot water recovery on my Bradford White Water Heater?
- A
  Aaron BryantAug 22, 2025
  If your Bradford White Water Heater has a slow hot water recovery, it could be due to a few reasons. Remove the heating element(s) and check for lime buildup. Check all wire connections for any looseness. Inspect the thermostat(s) and replace if needed. Also, verify the heating element's terminal block for the correct voltage and wattage rating.
M
Maria ClarkAug 27, 2025
Why is my Bradford White RE120U6-1NAL Water Heater overheating?
- H
  Heather AllisonAug 28, 2025
  If your Bradford White Water Heater is overheating or continuously operating, there might be a few reasons. Ensure the thermostat is flush with the tank surface. Check the heating elements for grounding and replace if needed. Adjust the thermostat to the desired setting. Also, inspect the ECO and replace the thermostat if necessary. If the water heater is too small for your needs, consider replacing it with a larger one.
E
Evan MedinaSep 2, 2025
Why are my Bradford White Water Heater elements noisy?
- E
  Elizabeth WatsonSep 2, 2025
  If your Bradford White Water Heater's elements are making singing or hissing noises, it's likely due to lime formation on the elements. Remove and clean the heating elements, replacing them if necessary.