Need help?Do you have a question about the Braemar Tudor Romeo and is the answer not in the manual?
Appliance installation and servicing must be performed by authorized personnel only.
Appliance is unsuitable for marine craft, caravans, or mobile homes.
Do not operate before reading instructions and follow safety guidelines.
Do not store flammable materials near the appliance.
Avoid spraying aerosols near the operating appliance.
Do not operate with any parts removed.
Do not modify the appliance.
Check troubleshooting section on page 5 before calling for service.
Service contact number is 1300 650 276.
Spare parts contact number is 1300 367 437.
Instructions for lighting and adjusting the large boiling burner.
Instructions for dual-ring burners: inner ring only and inner/outer ring.
How to turn off all burners by returning the knob to the OFF position.
Avoid placing items between pot and trivet to prevent damage.
Do not remove trivets or enclose burners with wok stands.
Avoid using large/heavy pots that could deform the cooktop.
Ensure pots are centered over burners and do not protrude.
Do not place hot objects directly on the glass surface.
Do not use abrasive cleaners; remove parts for cleaning.
Cleaning instructions for the glass hob surface.
Cleaning instructions for the stainless steel hob surface.
Cleaning instructions for the black burner components.
Cleaning instructions for the cooktop trivets.
Cleaning instructions for the enamelled spill bowls.
Cleaning instructions for spark electrode tips.
Cleaning instructions for the plastic control knobs.
Checks for issues when no ignition spark is present.
Checks for issues when burners will not light.
Checks for inner burner issues on super simmer models.
Checks for outer burner issues on dual-ring models.
Checks for issues with uneven flame appearance.
Information on when and how to contact service or installer.
Cooktop must be installed per instructions, codes, and standards.
Reiteration that installation and servicing require authorized personnel.
Steps to perform before and during cooktop installation.
Guidance on selecting location and required clearances from walls/hoods.
Specifies hob and bench cut-out dimensions for 900 series.
Specifies hob and bench cut-out dimensions for 600 series.
Instructions for physically fitting the cooktop into the bench opening.
Details for connecting Natural Gas and Propane cooktops.
Requirements for electrical connection and supply voltage/frequency.
Procedure for checking gas lines for leaks after connection.
Steps to check gas pressure for Natural Gas and Propane models.
Final checks of ignition, flames, and controls, plus customer instruction.
Table showing injector sizes and gas rates for different burner types.
Diagram illustrating the cooktop's electrical wiring schematic.
Warnings and advice regarding servicing, component access, and parts.
Details on warranty period for domestic and non-domestic use.
Situations and damages not covered by the warranty, e.g., misuse, acts of God.
Conditions for warranty, including proper installation and maintenance.
Manufacturer's right to refuse service and potential charges for non-faulty calls.
Fields for customer information and cooktop details for registration.
Copy fields for customer name, address, contact, and purchase type.
Copy fields for cooktop model, serial number, installation date, and retailer.
Information on how personal data from the warranty card is used and shared.
To Next Page
General