Brainworx Knifonium - Sample & Hold; 1 Source; 2 Trigger; 3 Destination

22
Knifonium
Plugin Manual
Sample & Hold
1
Source
Sets the input source that should be sampled.
2
Trigger
Sets the trigger input that determines when to capture a new sample.
3
Destination
Sets the destination to which the held sample is applied.
4
Pitch Quantization
A plugin-only feature, when active and S&H destination is set to pitch, the S&H
output is quantized to semitone steps.
5
Multi-Mode
Another plugin-only feature.
Multi: a different sample is produced for each voice.
Single: the same sample is used for all voices.
1 2 3 5
4