3
Knifonium
Plugin Manual
VCO 1 & 2
1
Octave
Sets the VCO‘s octave in terms of organ stop. 8‘ equals native pitch, 4‘ = one
octave above, 16‘ = 1 octave below etc.
2
Type
Sets the VCO‘s oscillator type. The pulse oscillator is available on VCO1 only.
3
Pulse Width (VCO 1 only)
Sets the pulse width of the pulse oscillator.
4
Pulse Width Modulation Source (VCO 1 only)
Switches the modulation source for the pulse width.
5
Coarse Tune
Sets the VCO‘s coarse tuning in semitones.
6
Fine Tune
Sets the VCO‘s fine-tuning in cents.
1 5 2 6
3 4
To Next Page
Loading...