Infrared camera:
Press and hold the ON button for 2 seconds to turn on the camera.
Power on: Press and hold the ON button for 2 seconds and see if a red light starts flashing twice. The infrared camera is now
on.
Power off: Press and hold the ON button for 2 seconds and see if a red light starts flashing three times. The infrared camera is
now turned off.
Comments:
When the battery is empty or the SD card is full, the light will flash red or blue for 5 seconds. After this, the camera will turn
itself off automatically. If there is an SD card in the camera at the time of shutdown, the videos and photos taken will be
saved first. After the camera has turned itself off automatically, it is not possible to turn the camera on for one minute. If the
battery is empty, charge the camera.
Press and hold the camera for 6 seconds to turn the camera off.
This manual is applicable for item number 38504.
More information about this product is available on www.brainz-electronics.nl
To Next Page
Loading...