EN
BRAINZ MINI PRO CAMERA
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE USE
This is what you need:
USB Cable (included)
Camera clip (included)
Mounting platform (included)
SD Card (not included)
Product description:
A mini action camera that comes with two clips to attach it to, for example, clothing or a fixed location. You can switch it on
by pressing the button on the camera. The video recorded in HD quality and stored on an SD card (not included).
This is how to charge it:
Charging can be done via the USB port of your PC or via a USB adapter. Connect the camera to the supplied cable and then
plug it into a power supply. Charging during filming. Connect the camera to the supplied cable and plug it into a 5V power
bank with USB connection. The camera is not yet fully charged when the light flashes red. When the light is solid red, the
camera is fully charged.
TIP: When the light keeps red, disconnect the camera and connect it to a power supply again. In this way you can check if the
camera is fully charged.
This is how to set it up:
Make sure the camera is properly charged. Insert a Micro SD card into the camera. If you do not do this, the camera cannot
take pictures. You can optionally mount the camera using the supplied clip and mounting plate.
Cable functions:
The supplied cable can be used for various things. You can connect the cable to your camera and plug it into your computer
to charge the camera. You can also connect the cable to your camera and insert it into a 5V power bank with USB connection
to charge the camera. You can also connect the cable to your camera and then plug the yellow TV OUT cable into your
television to view your videos and photos on TV.
720p video recording:
Press and hold the ON button for 2 seconds to turn on the camera. Then press the ON button once to start filming. To stop
filming, press the ON button once again. The camera stores videos of 5 minutes at a time.
1080p video recording:
Press and hold the ON button for 2 seconds to turn the camera on. Then press the MODE button once, this should light up a
red and a blue light. Then press the ON button once to start filming, this will cause the red light to flash. To stop filming, press
the ON button once. The camera stores videos from 3 to 5 minutes at a time.
Photography:
Press and hold the ON button for 2 seconds to turn on the camera. Then press the MODE button twice, a red light should
come on. To take photos, press the ON button once.
To Next Page
Need help?
General