Brandt 832 - Cable Clamps; SAE to Metric Conversions

63
8” & 10” Transport Augers
7.1.5 Cable Clamps
TABLE 7-5. Cable Clamp Torque Values
7.2 SAE-to-Metric Conversions
This manual provides values and measurements in units according to the standards of the Society of
Automotive Engineers (SAE). Table 7-6 provides the conversion factor for SAE units to SI units (metric
system).
Cable Clamp
Size
Min. Number
of Clamps
Amount of
Cable to turn
back in inches
Torque in lb-ft
3/16” 2 3 3/4” 7.5
1/4” 2 4 3/4” 15
5/16” 2 5 1/4” 30
3/8” 2 6 1/2” 45
1/2” 3 11 1/2” 45
5/8” 3 12” 90
TABLE 7-6. SAE-to-Metric Conversion
SAE Unit Conversion Factor SI Units (Metric)
ft/min x 0.3048 Metres/min (m/min)
ft/s x 0.3048 Metres/s (m/s)
US gallon x 3.7854 Litres (L)
US gal/min (GPM) x 3.7854 Litres/min (L/min)
hp x 0.7457 Kilowatts (kW)
in x 2.54 Centimetres (cm)
in x 25.4 Millimetres (mm)
in
3
x 16.3871
Cubic centimetres (cm
3
or cc)
lb x 0.4535 Kilogram (kg)
lbf x 4.4482 Newtons (N)
lbf.ft or ft-lb x 1.3558 Newton metres (N.m)
lbf.in or in-lb x 0.1129 Newton metres (N.m)
mph x 1.6063 Kilometres/hour (km/h)
oz x 29.5735 Millilitres (ml)
psi x 0.06894 Bar
psi x 6.8948 Kilopascals (kPa)
psi x 0.00689 Megapascals (MPa)