This document describes the Brandt DWF128DW and DWF128DS dishwashers, providing comprehensive information on their function, technical specifications, usage, and maintenance.
Function Description:
The Brandt DWF128DW and DWF128DS are automatic dishwashers designed for household use and similar applications. They are equipped with a water softener system to remove minerals and salts from the water, preventing adverse effects on appliance operation and ensuring optimal cleaning performance. The dishwashers offer various wash cycles tailored to different levels of soiling and types of tableware, including Intensive, ECO, Glass, 90-minute, Rapid, and Self-Cleaning programs. A rinse aid dispenser is integrated to prevent water droplets, spots, and streaks, enhancing drying results. The appliance also features a detergent dispenser for main wash and pre-wash phases.
Important Technical Specifications:
- Model: DWF128DW, DWF128DS
- Manufacturer: BRANDT
- Standard Place Settings: 12
- Energy Efficiency Class: A++ (highest efficiency)
- Annual Energy Consumption: 258 kWh (based on 280 standard cleaning cycles with cold water fill and low power modes)
- Energy Consumption of the Standard Cleaning Cycle: 0.9 kWh
- Power Consumption of Off-mode: 0.45 W
- Power Consumption of Left-on Mode: 0.49 W
- Annual Water Consumption: 3080 liters (based on 280 standard cleaning cycles)
- Drying Efficiency Class: A (highest efficiency)
- Standard Cleaning Cycle: ECO 45°C
- Program Duration of the Standard Cleaning Cycle: 225 minutes
- Noise Level: 47 dB(A) re 1 pW
- Mounting: Free standing, also suitable for built-in installation
- Rated Voltage / Frequency: 230V/50Hz
- Power Consumption: 1930W
- Water Pressure (Flow Pressure): 0.04-1.0 MPa (0.4-10 bar)
- Dimensions:
- Height (H): 845 mm
- Width (W): 598 mm
- Depth (D1, with door closed): 600 mm
- Depth (D2, with door opened 90°): 1175 mm
- Water Softener Setting: H3 (factory default)
- Rinse Aid Setting: 6 (factory default)
Usage Features:
The dishwasher is operated via a control panel with buttons for Power, Program selection, Delay start, Half-load, Extra Drying, Child Lock, and Start/Pause.
- Power: Turns the dishwasher on/off.
- Program Selection: Allows choosing from various wash cycles (Intensive, ECO, Glass, 90min, Rapid, Self-Cleaning). The selected program indicator lights up.
- Delay Start: Delays the cycle start time by up to 24 hours in one-hour increments.
- Half-load: Saves energy and water when washing 6 place settings or less (available for Intensive, ECO, Glass, and 90 min programs).
- Extra Drying: Enhances drying results (available for Intensive, ECO, Glass, and 90 min programs).
- Child Lock: Locks control panel buttons (except Power) to prevent accidental operation. Activated by pressing Half-load + Extra Drying for 3 seconds.
- Start/Pause: Starts the selected program or pauses it during operation.
- Display: Shows remaining time, delay time, and error codes.
- Warning Indicators: Lights for "Rinse Aid" and "Salt" indicate low levels requiring refill.
- Loading: The dishwasher features upper and lower baskets, along with a cutlery basket. Items should be loaded to ensure proper water circulation and prevent damage. Sharp items should be placed points down or horizontally. The cup rack in the upper basket can be raised or removed to accommodate taller items.
- Salt Refill: The salt container is located beneath the lower basket. It should be refilled with dishwasher-specific salt when the warning light appears. A short wash program should be started immediately after refilling to prevent damage from salty water.
- Rinse Aid Refill: The rinse aid dispenser should be refilled when the warning light appears. The consumption level can be adjusted (D1-D5) to optimize drying performance.
- Detergent Dispenser: Detergent should be added to the larger cavity for the main wash cycle. A small amount can be added to the door for pre-wash if items are heavily soiled. Only dishwasher-specific detergent should be used.
- Adding a Forgotten Dish: A forgotten dish can be added during a cycle before the detergent dispenser opens. The process involves pausing the wash, waiting 5 seconds, opening the door, adding the dish, closing the door, and restarting the cycle after 10 seconds.
Maintenance Features:
- External Care: Regularly clean door seals with a soft damp cloth to remove food deposits. Wipe the control panel with a soft damp cloth only, avoiding spray cleaners or abrasive materials.
- Internal Care: The filtering system (main filter, coarse filter, fine filter) in the wash cabinet base should be checked regularly and cleaned under running water if clogged. A soft cleaning brush can be used for thorough cleaning. Filters must be reassembled securely to prevent debris from entering the system.
- Spray Arms: Spray arms should be cleaned regularly to prevent hard water chemicals from clogging jets and bearings. The upper and lower spray arms can be removed for cleaning with soapy water and a soft brush.
- Frost Precaution: In winter, after each wash cycle, disconnect power, turn off water supply, drain water from inlet pipe and valve, reconnect the inlet pipe, and remove water from the sump using a sponge.
- After Every Wash: Turn off water supply and leave the door slightly open to prevent moisture and odors.
- Remove Plug: Always unplug the appliance before cleaning or maintenance.
- No Solvents or Abrasive Cleaning: Do not use solvents or abrasive cleaners on exterior or rubber parts. Use warm soapy water for exterior and a cloth dampened with vinegar or dishwasher-specific cleaner for interior spots.
- Long-term Non-use: Run an empty wash cycle, unplug, turn off water supply, and leave the door slightly open to prolong door seal life and prevent odors.
- Moving the Appliance: Keep the appliance in a vertical position if possible; it can be positioned on its back if absolutely necessary.
- Seals: Periodically clean door seals with a damp sponge to prevent food residue buildup and odors.
- Installation and repair must be performed by a qualified technician.
- The appliance is intended for household and similar applications.
- Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, can use the appliance under supervision or after receiving instructions on safe use and understanding hazards. Children should not play with the appliance or perform cleaning/maintenance without supervision.
- Packaging material can be dangerous for children.
- For indoor household use only.
- Do not immerse the unit, cord, or plug in water.
- Unplug before cleaning or maintenance.
- Use a soft cloth with mild soap for cleaning.
- Earthing Instructions: The appliance must be earthed. The plug must be connected to an appropriate earthed outlet. Improper earthing can result in electric shock. Consult a qualified electrician if in doubt.
- Do not modify the plug or use adapters.
- Do not abuse, sit on, or stand on the door or dish rack.
- Do not operate without enclosure panels in place.
- Open the door carefully during operation due to risk of squirting water.
- Do not place heavy objects on the open door.
- Load sharp items points down or horizontally to avoid damaging the door seal.
- Dishwasher detergents are strongly alkaline and dangerous if swallowed. Avoid skin/eye contact and keep children away.
- Check detergent powder is empty after wash cycle.
- Do not wash plastic items unless marked "dishwasher safe."
- Use only recommended detergent and rinse agents. Never use soap, laundry detergent, or hand washing detergent.
- Do not leave the door open to avoid tripping hazards.
- If the supply cord is damaged, it must be replaced by the manufacturer or service agent.
- Ensure power supply is not excessively bent or flattened during installation.
- Do not tamper with controls.
- Connect to main water valve using new hose sets only.
- Appliance automatically switches off after 30 minutes in standby mode to save energy.
Need help?
General
To Next Page
