Need help?Do you have a question about the Brandt GRAIN VAC 5000 and is the answer not in the manual?
General safety precautions and responsibilities for operating the Grain Vac.
Specific safety guidelines for operating the Grain Vac safely.
Safety procedures to follow when performing maintenance on the Grain Vac.
Safety rules for transporting the Grain Vac on public roads and highways.
Illustrates the position and content of various safety decals on the Grain Vac.
Guides on initial operation including break-in procedures and checks.
Lists checks to perform before operating the Grain Vac each time.
Procedures for connecting and disconnecting the Grain Vac to a tractor or truck.
Detailed instructions for operating the Grain Vac in various scenarios.
Lists recommended service intervals for daily, weekly, and hourly checks.
How to check and adjust the fan drive belt tension for optimal performance.
Maintenance and replacement procedures for the auger chain drive.
Procedure for replacing the shear bolt that protects the auger.
Procedures for installing and adjusting auger flights.
Explains the air throttle function and how to adjust it.
Detailed steps for replacing the fan rotor and bearing box.
Troubleshooting steps if the fan rotor is rubbing on the inlet.
General safety precautions and responsibilities for operating the Grain Vac.
Specific safety guidelines for operating the Grain Vac safely.
Safety procedures to follow when performing maintenance on the Grain Vac.
Safety rules for transporting the Grain Vac on public roads and highways.
Illustrates the position and content of various safety decals on the Grain Vac.
Guides on initial operation including break-in procedures and checks.
Lists checks to perform before operating the Grain Vac each time.
Procedures for connecting and disconnecting the Grain Vac to a tractor or truck.
Detailed instructions for operating the Grain Vac in various scenarios.
Lists recommended service intervals for daily, weekly, and hourly checks.
How to check and adjust the fan drive belt tension for optimal performance.
Maintenance and replacement procedures for the auger chain drive.
Procedure for replacing the shear bolt that protects the auger.
Procedures for installing and adjusting auger flights.
Explains the air throttle function and how to adjust it.
Detailed steps for replacing the fan rotor and bearing box.
Troubleshooting steps if the fan rotor is rubbing on the inlet.
General| Brand | Brandt |
|---|---|
| Model | GRAIN VAC 5000 |
| Category | Lifting Systems |
| Language | English |
To Next Page
