Braun 1 SERIES - Product Components and Charging; Component Identification; Charging the Shaver

16
Do not apply to eyes.
Dispose of properly when
empty.
Description
1 Foil protection cap
2 Shaver foil
3 Cutter block
4 Long hair trimmer
(150s, 130s only)
5 On switch
6 Off switch
7 Power LED
(150s, 140s only)
8 Shaver power socket
9 Special cord set
(design can differ)
Charging
(150s, 140s only)
Recommended ambient
temperature for charging is
5 °C to 35 °C. The battery
may not charge properly
or at all under extreme low
or high temperatures.
Recommended ambient
temperature for shaving is
15 °C to 35 °C. Do not
expose the shaver to
temperatures higher
than 50 °C for extended
periods of time.
• Using the special cord
set (9) connect the
shaver to an electrical
outlet with the motor
switched off because the
battery won’t charge
unless the shaver is
switched off.
• To make sure that the
shaver is switched off,
press the
switch (6)
before you start charging.
• When charging for the
first time, leave the
shaver to charge contin-
uously for 16 hours.
• The power LED (7)
indicates that the shaver
is connected to an
electrical outlet.
91874780_UI_150s140s130s_CN-KR.indd 1691874780_UI_150s140s130s_CN-KR.indd 16 21.12.20 08:5521.12.20 08:55