Braun 1012 Manual&Nbsp;

6
English
Our products are designed to meet the highest standards of quality, functionality
and design. We hope you entirely enjoy your new Braun shaver.
Caution
• Do not use the shaver near, or over, basins filled with water (e.g. bath tubs, showers
etc.).
• For safety reasons, periodically check the cord for damage and replace it, if it is
loose in the shaver socket.
• Do not wind the cord around the shaver.
1 Description
1
Foil protection cap 5 On/off Switch
2 Foil frame 6 Longhair trimmer switch
3 Cutter block 7 Shaver socket with voltage selector
4 Longhair trimmer
2 Specifications
• Wattage: 10 Watts
• Adjustable voltage:
115 V (110 V ... 120 V), 230 V (220 V ... 240 V).
Set the voltage correctly (115 V or 230 V) at the bottom of the shaver (a).
Only connect to ac (~).
3 Shaving
Switch positions
off
on
longhair trimmer: The longhair trimmer is activated (for exact trimming of sideburns,
moustache and beard) (d)
Tips for the perfect shave
• We recommend to shave before
washing, as the skin tends to be slightly swollen
after washing.
• Hold the shaver at right angles (90°) to the skin.
• Stretch your skin and shave against the direction of beard growth.
4 Keeping your shaver in top shape
4.1 Cleaning
• After shaving, switch the shaver off. Remove the foil frame 2 (e) and gently tap it
out on a flat surface.
• Then thoroughly clean the cutter block with the brush. About every four weeks,
clean the cutter block with Braun cleaning agents.
• Do not clean the shaving foil with the brush.
• If you have a very dry skin and you notice a reduced operation time of the shaver,
you should put a drop of sewing machine oil onto the shaving frame.
5462061_S.4-54.fm Seite 6 Donnerstag, 9. August 2001 1:15 13

Braun 1012 Specifications

General

Brand	Braun
Model	1012
Category	Electric Shaver
Language	English