10
Cleaning
The shaver head is suitable for cleaning under running tap water.
Warning: Detach the shaver from the power supply before cleaning
the shaver head in water.
Regular cleaning ensures better shaving performance. Rinsing the shaver
head under running water after each shave is an easy and fast way to keep
it clean:
Rinse the shaver head under hot running water. You may use liquid soap
without abrasive substances. Rinse off all foam.
Next, remove the shaver Foil & Cutter cassette (1) and let it dry.
If you regularly clean the shaver under water, then once a week apply a
drop of light machine oil onto the long hair trimmer (2) and shaver Foil &
Cutter cassette (1) (picture).
Alternatively, you may clean the shaver using a brush:
Switch off the shaver. Remove the shaver Foil & Cutter cassette and tap it
out on a flat surface.
Using a brush, clean the inner area of the shaver head. However, do not
clean the shaver Foil & Cutter cassette with a brush (picture) as this may
damage it.
Keeping your shaver in top shape
To maintain 100% shaving performance, replace the shaver Foil & Cutter
cassette (1) at least every 18 months or when worn.
Foil & Cutter cassette: 32B
Subject to change without notice.
This product conforms to the European Directives EMC 2004/108/EC
and Low Voltage 2006/95/EC.
For electric specifications, see printing on the special cord set.
•
•
•
•
•
98727764_Floater300_S6-48.indd 1098727764_Floater300_S6-48.indd 10 23.05.2008 10:57:21 Uhr23.05.2008 10:57:21 Uhr
To Next Page
Loading...
Need help?
General
