9
(C) Care and Cleaning
Motor body
• Disconnect power before cleaning.
• Do not immerse the motor body in water or any
other liquid. Wipe motor body, control panel and
power cord with a damp or dry cloth only.
• Do not use abrasive cleaners or scouring pads.
Jug and Smoothie2Go Attachments
Make sure the jug is empty before you unscrew the
locking ring. Handle the blade with caution.
• All detachable parts including the smoothie2Go
attachments are dishwashersafe.
• Parts may also be washed with hot, soapy water.
Rinse and dry thoroughly.
• For an effi cient clean of the lids and the blades,
remove the gaskets (3/12b, 5a/13a).
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
Materials and accessories coming
into contact with food conform
to EEC regulation 1935/2004.
Troubleshooting Guide
Problem Potential Causes Solution
Blender does not operate. Jug is not attached properly.
Check the position of the jug.
The jug handle should be on the
right or left side of the motor
body.
Jug is leaking Gasket is loose, or even torn.
Check if gasket is mounted
properly and in the right order.
Liquid splashing out of the jug
Jug is overfi lled.
Check maximum quantity
recommendation.
Speed selected is too high. Check speed recommendation.
5722310244_JB7192_CN_S6-16.indd 9 03.07.17 13:19
To Next Page
Loading...
