EasyManua.ls Logo

Braun 750CC-6 - User Manual

Braun 750CC-6
21 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.braun.com
Series 7
Type 5694
750cc-7
Stapled booklet, 110 x 200 mm, 126 p (incl. 6 p cover), 2/2c = HKS43N + black

Questions and Answers

  • S
    Susan SinghSep 18, 2025
    Why are battery segments skipped in the display of my Braun Electric Shaver?
    • H
      Heidi SmithSep 18, 2025
      Skipped battery segments on your Braun Electric Shaver's display, while the battery capacity decreases, often indicate that the foil and cutter are worn, requiring more power for each shave. To fix this, renew the Foil & Cutter cassette and regularly oil the shaving system, especially when cleaning with water only.
  • A
    amcgeeAug 25, 2025
    Why does my Braun 750CC-6 turn off with a fully charged battery?
    • D
      David RodriguezAug 25, 2025
      If your Braun Electric Shaver turns off even with a fully charged battery, it's likely due to worn foil and cutter parts requiring more power than the motor can provide. Replacing the Foil & Cutter cassette should resolve this. Also, regularly oil the shaving system, especially after cleaning it with water only.
  • A
    Ashley WrightAug 26, 2025
    What to do if cleaning doesn't start when pressing the start button on my Braun 750CC-6 Electric Shaver?
    • H
      hjacksonAug 26, 2025
      If cleaning doesn't initiate when you press the start button, ensure the shaver is correctly placed in the Clean&Renew station so that the contacts align. Also, verify that the cleaning cartridge has enough cleaning fluid (replace it if the display lights red). Finally, ensure the appliance is not in stand-by mode by pressing the start button again.
  • J
    jessicalewisAug 27, 2025
    Why has my Braun 750CC-6's shaving performance dropped significantly?
    • T
      Thomas RobertsAug 27, 2025
      A significant drop in shaving performance of your Braun Electric Shaver can be due to several reasons: worn foil and cutter, a changed personal setting, or a clogged shaving system. To resolve this, renew the Foil & Cutter cassette. For a thorough and fast shave we recommend the green (intensive) setting. Also, soak the Foil & Cutter cassette into hot water with a drop of dish liquid, rinse it properly, tap it out, and apply a drop of light machine oil on the foil once dry.
  • L
    lisaguerraSep 22, 2025
    Why does my Braun 750CC-6 Electric Shaver have an unpleasant smell from the shaver head?
    • R
      Richard OchoaSep 22, 2025
      An unpleasant smell from your Braun Electric Shaver head can occur if it's cleaned with water improperly or if the cleaning cartridge has been in use for too long. When cleaning the shaver head with water, use only hot water and, occasionally, some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Also, change the cleaning cartridge at least every 8 weeks.
  • K
    Kimberly WhitneySep 23, 2025
    What should I do if the replacement symbol lights up on my Braun 750CC-6 after changing shaving parts?
    • L
      Lisa LuceroSep 23, 2025
      If the replacement symbol lights up on your Braun Electric Shaver even after you've changed the shaving parts, it means the reset button hasn't been pushed. Push the reset button for at least 3 seconds to reset the counter.
  • K
    Kent RobertsSep 9, 2025
    Why are battery segments skipped on my Braun 750CC-6 display?
    • R
      Robert Holt IISep 10, 2025
      Skipped battery segments on your Braun Electric Shaver display, while the battery capacity is decreasing, can happen if: * The foil and cutter are worn, requiring more power for each shave. In this case, renew the foil & cutter cassette. * The shaving system needs regular oiling, especially after cleaning with water only.
  • V
    Vincent BowmanSep 12, 2025
    Why is there an increased consumption of cleaning fluid in my Braun 750CC-6?
    • W
      wwilsonSep 12, 2025
      Increased consumption of cleaning fluid in your Braun Electric Shaver may be caused by a clogged drain in the Clean&Renew station. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
  • W
    William FrancisSep 3, 2025
    What to do if the replacement symbol lights up after changing shaving parts on my Braun 750CC-6?
    • B
      Benjamin Nelson MDSep 3, 2025
      If you've recently changed the shaving parts on your Braun Electric Shaver but the replacement symbol is still lit, it likely means the reset button hasn't been pressed. Push the reset button for at least 3 seconds to reset the counter.
  • B
    Betty LawsonSep 1, 2025
    What to do if shaving system is still wet after cleaning Program has been completed in Braun 750CC-6?
    • K
      Kelly DuncanSep 1, 2025
      If the shaving system of your Braun Electric Shaver remains wet after the cleaning program, it could be due to a clogged drain in the Clean&Renew station or an old cleaning cartridge. Try cleaning the drain with a wooden toothpick and regularly wipe the tub clean. If that doesn't work, the ethanol proportion has decreased while the oil proportion has increased in the cleaning cartridge. Remove residue with a cloth.

Braun 750CC-6 Specifications

General IconGeneral
TypeElectric Shaver
SeriesSeries 7
Model750CC-6
Shaver TypeFoil
Wet & Dry UseYes
Power SourceRechargeable Battery
Battery Life50 minutes
Charging Time1 hour
Precision TrimmerYes
Cordless UseYes
Auto VoltageYes
Cleaning SystemClean & Charge Station
Quick Charge5 min
DisplayLED

Related product manuals