10
Our products are engineered to meet the
highest standards of quality, functionality
and design. We hope you thoroughly
enjoy using your Braun Silk·épil 9 Flex.
Before using the appliance, please read
the user manual carefully and keep it for
future reference.
Warning
•
This appliance is provided with
a Safety
Extra Low Voltage
plug-in power supply
(8). To
avoid risk of electric shock, do
not exchange or manipulate
any par
t of it.
•
Only use a Braun power sup-
ply, type
492
.
•
Do not open the appliance!
•
This appliance is suitable
for use in a bathtub or
shower. For safety reasons, it
can only be operated cordless.
•
This appliance can be used by
childr
en aged from 8 year
s
and above and persons with
r
educed physical, sensor
y or
mental capabilities or lack of
experience and knowledge if
they have been given super
vi-
sion or instruction concerning
the safe use of the appliance
and under
stand the hazar
ds
involved. Children should not
play with the appliance.
Cleaning and user mainte-
nance should not be made by
childr
en.
Warnings
• For hygienic reasons, do not share this
appliance with other persons.
• When switched on, the appliance must
never come in contact with the hair on
your head, eyelashes, ribbons, etc. to
prevent any danger of injury as well as
to prevent blockage or damage to the
appliance.
Description
1a High-frequency massage cap
1b Skin contact cap
2 Epilation head
3 Smart / SensoSmart
TM
light
4 Power button
5 Speed button
6 Charging light
7 Release button
8 Power supply
9 Trimmer comb (3 mm)*
10 Shaver head*
* not with all models
Power button
Press the power button (4) to turn the
appliance on and off.
When it is switched on, the Smart light (3)
shines to provide good visibility of fine hairs.
SensoSmart
TM
pressure control (E)
The SensoSmart light (3) turns red when
you apply too much pressure. This func-
tion has been developed to provide best
epilation results when using the massage
cap (1a). To activate it, press and hold
the power button (4) until the white and
red flashes stop (10 seconds). Proceed
the same way to disable this function.
Travel lock (D)
To activate the travel lock, press the
power button 3 seconds until a beep
confirms successful activation. To unlock
the device, press the power button again
3 seconds. Release the power button,
when the appliance starts running.
English
91449695_Silk_epil9_Flex_SES_900x_Solo_Euro_GDM.indd 1091449695_Silk_epil9_Flex_SES_900x_Solo_Euro_GDM.indd 10 25.05.20 09:3625.05.20 09:36
Page 15 of 117
P&G RELEASE 06/01/2020 03:51:10 AM Printed 2020-06-01
To Next Page
Loading...
