To Next PageTo Next Page
Need help?Do you have a question about the Braun A5S0 Series and is the answer not in the manual?
Lists all figures included in the manual for visual reference.
Provides definitions for all abbreviations used throughout the technical manual.
Details the intended applications and operational environments for the speed sensors.
Explains the correct procedures and considerations for physically installing the sensor.
Describes sensor plug pinouts and wire color codes for electrical connections.
Illustrates the pin configuration for the sensor's connector, specifying M12 A-coding.
Covers signal frequency capabilities, transmission distances, and cable requirements.
Explains how the sensor indicates direction of rotation via its output signal.
Details the two phase-shifted frequency signals for determining speed and direction.
Illustrates and describes the characteristics of the sensor's output pulse signals under various load conditions.
Provides essential safety information and references to specific safety datasheets.
Helps users correlate older product ordering codes with the current designation system.
Details the sensor's certification according to IEC 61508 for SIL 3 functional safety.
Covers the sensor's compliance with EN ISO 13849-1 for Performance Level e, Category 4.
Outlines the sensor's validation according to EN ISO 13849-2 for PL e, Category 4.
Specifies the sensor's certification according to IEC 62061 for SILCL 3 in machinery applications.
Presents the official TÜV NORD certificate confirming SIL 3 safety rating for the sensor series.
Provides fundamental safety guidelines for handling and operating the sensors correctly.
Discusses Electromagnetic Interference (EMI) compliance and considerations for sensor operation.
Highlights the risk of metallic abrasion affecting sensor performance and how to mitigate it.
Details the crucial steps for initial setup and recalibration after sensor installation.
Outlines safety procedures and recalibration requirements during machine maintenance or overhaul.
Lists the EU directives and standards the sensor complies with for market access and safety.
Specifies the required supply voltage, current consumption, and power supply type recommendations.
Describes the sensor's output signal type, characteristics, and protection features.
Defines the operational speed or signal frequency range the sensor can accurately measure.
Details cable specifications for reliable signal transmission over various distances.
Specifies the sensor's protection class and IP rating for environmental resistance.
Details the types of connectors available and connection methods for the sensors.
Lists the temperature limits for the sensor's front part and different connection types.
Provides information on available thread types and nominal lengths for sensor installation.
Lists the physical diameters of various BRAUN sensor connection cables.
States that weight depends on sensor length and shaft diameter.
Specifies the sensor's resistance to vibration and shock impacts.
Shows dimensional drawings for sensors with straight M12 connectors.
Shows dimensional drawings for sensors with angled M12 connectors.
Provides dimensional drawings for sensors with integrated fixed cables.
Illustrates dimensions for NPT-threaded sensors with fixed Teflon® cables.
General| Category | Security Sensors |
|---|---|
| Type | Motion Sensor |
| Detection Range | Up to 12 meters |
| Battery Life | Up to 2 years |
| Power Supply | 3V Lithium Battery |
| Operating Temperature | -10°C to +50°C |
| Installation | Wall-mounted |
| Connectivity | Wireless |
| Compatibility | Compatible with Braun Smart Home System |
