Braun BN0265 - Chronograph Operation

How to reset (after battery change)
1) Pull out the crown to the second click
position (2).
2) Press the button B for two seconds
and release the button.
3) Push the crown back to the normal
position (N)
*It is not necessary to set the
chronograph hands after the battery is
exchanged. If the chronograph hand
positions are incorrect, following below
procedure all the chronograph hands
will be reset to “0” position.
How to use the chronograph
A
B
A
B
1. Start:
Press button A
to start the
chronograph.
The chronograph
hands will start
moving.
2. Stop (Finish):
Press button A
again to stop the
chronograph.
The chronograph
hands stop to
indicate the
elapsed time.
5