6
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for trimming is 15 °C to
35 °C. Do not expose the appliance to temperatures higher than 50 °C for
extended periods of time.
• Connect the appliance via the special cord set (6) to an electrical outlet.
The appliance will only charge when it is switched off.
• A full charge takes approx. 10 hours and provides up to 40 minutes of
cordless operation time.
• The charging indicator (7) in the special cord set lights up continuously
when the appliance is being charged.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Trimming
• Click the precision comb (1) onto the trimmer head (2).
• Turn the length selector (3) to your desired cutting length. The comb
slides automatically up or down.
• Length settings precision comb (1): 1 to 10 mm in 0,5 mm steps
• Slide the on/off switch up to turn the appliance on.
• Trim against hair growth by guiding the flat comb part over the skin.
• Avoid clogging the comb with hair. Remove and clean it from time to time.
• For shaping sideburns, moustaches and partial short beards, take off the
precision comb.
Cleaning and maintenance
• Switch off the appliance.
• Take off the comb and the trimmer head.
• Use the brush to clean the head, comb and the appliance.
• The removed head and comb can be cleaned under running water.
Let them dry completely before reattaching them.
• To keep the trimmer working properly, oil it with light machine oil (not
included) regularly.
91320161_BT_3020_CEEMEA.indd 691320161_BT_3020_CEEMEA.indd 6 04.01.17 14:0804.01.17 14:08
CSS APPROVED Effective Date 12Jan2017 GMT - Printed 05Apr2017 Page 6 of 60
To Next Page
Loading...
Need help?
General
