Braun CT6cc User Manual (English)

Other manuals for Braun CT6cc

Questions and Answers:

D
davidmartinezAug 7, 2025
What to do if cleaning does not start when pressing the start button on my Braun Electric Shaver?
- J
  James MejiaAug 8, 2025
  If cleaning doesn't start when you press the start button on your Braun Electric Shaver, it could be due to several reasons: * The shaver isn't placed properly in the Clean&Charge station. Ensure the shaver's contacts align with those in the station. * The cleaning cartridge doesn't contain enough cleaning fluid (the display lights red). Insert a new cleaning cartridge. * The appliance is in standby mode. Press the start button twice.
J
joseph54Aug 12, 2025
How to get rid of the unpleasant smell from Braun Electric Shaver head?
- K
  Katie ReedAug 12, 2025
  An unpleasant smell from your Braun Electric Shaver head may be because the shaver head is cleaned with water or the cleaning cartridge has been in use for more than 8 weeks. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances). Remove the foil & cutter cassette to let it dry. Also, change the cleaning cartridge at least every 8 weeks.
J
Jacqueline HatfieldAug 16, 2025
Why is the shaver head of my Braun CT6cc Electric Shaver humid?
- K
  Karen SimmonsAug 16, 2025
  A humid shaver head on your Braun Electric Shaver could be because the drying time after automatic cleaning was insufficient, or the Clean&Charge station drain is clogged. To resolve this, clean directly after shaving to allow enough drying time. Also, clean the drain with a wooden toothpick.
J
Jacob KingAug 20, 2025
Why has my Braun CT6cc shaving performance dropped significantly?
- C
  Craig DavilaAug 20, 2025
  A drop in shaving performance for your Braun Electric Shaver could be due to a clogged shaving system or worn foil and cutter. Try soaking the foil & cutter cassette in hot water with a drop of dish liquid, then rinse and tap it out. Once dry, apply a drop of light machine oil. If that doesn't help, renew the foil & cutter cassette.
S
sheila33Aug 25, 2025
Why has the battery performance of my Braun CT6cc Electric Shaver dropped significantly?
- T
  Timothy FloresAug 25, 2025
  A significant drop in battery performance in your Braun Electric Shaver could be due to regularly cleaning the shaver head with water but not lubricating it, or worn foil and cutter requiring more power. If you regularly clean with water, apply a drop of light machine oil on top of the foil once a week. You might also need to renew the foil & cutter cassette.
P
pevansAug 29, 2025
Why is there increased consumption of cleaning fluid in my Braun CT6cc Electric Shaver?
- B
  Bradley WilsonAug 29, 2025
  Increased consumption of cleaning fluid in your Braun Electric Shaver may be because the drain of the Clean&Charge station is clogged. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
S
Sabrina StephensSep 2, 2025
Why is the cooling element of my Braun Electric Shaver warm?
- D
  Dalton BeanSep 2, 2025
  A warm cooling element in your Braun Electric Shaver could be because the shaver was used with the cooling function a few minutes prior, or the battery capacity is too low for the cooling function. You can continue using the shaver as is or turn on the cooling function and wait a few seconds for it to activate again. To prevent this, charge the shaver after each shave to ensure sufficient battery capacity.