IMPORTANT PRODUCT SAFETY INSTRUCTIONS
Proper Handling of the Digital Photo Frame
Always handle the Digital Photo Frame with care. Avoid touching the LCD
screen. Skin oils are difficult to remove.
Always position the Digital Photo Frame on a stable and level surface. Unstable
surfaces can cause the Digital Photo Frame to topple and fall, resulting in
possible damage or injury.
Avoid exposing the Digital Photo Frame to direct sunlight or high temperatures,
which can damage or shorten its useful life. Do not place it near heat sources
such as radiators, heat registers, or other appliances that generate heat. Orient
the Digital Photo Frames away from direct sunlight to reduce glare.
Avoid exposing the Digital Photo Frame to rain, water, moisture or high
humidity. Do not place it near basins or sinks where it may come in contact with
water.
Never place heavy or sharp objects on the LCD panel, frame, or power cord.
Overloading Outlets
Do not overload electrical power sources when using the Digital Photo Frame.
Overloading wall outlets, circuits, or extension cords can result in overheating,
fire, or electric shock. Use only grounded or polarized outlets.
Power Cord Protection
Minimize wear on the power supply cord. The power supply cord should be
routed away from foot traffic and contact with other objects. Do not route the
power cord under rugs or carpeting. The cord should never be severely bent,
pinched, or twisted. Periodically inspect the power cord and each end of the
cord for wear or damage. Unplug and replace the cord if it is damaged.
12
To Next Page
Loading...
Need help?
General
