Braun InterFace Excel 3770 User Manual

7
4 Keeping your shaver in top shape
4.1 Cleaning
• After shaving, switch the shaver off. Press the release buttons, take off the
shaver foil (d) and gently tap it out on a flat surface (e).
• Then thoroughly clean the cutter block with the brush (f). About every four
weeks, clean the cutter block with Braun cleaning agents (g).
• Do not clean the shaver foil with the brush.
• If you have a very dry skin and you notice a reduced operation time of the
shaver, you should put a drop of light machine oil onto the InterFace trimmer
and shaver foil (g).
4.2 Replacing the shaving parts
• The shaver foil and cutter block are precision parts that, in time, are subject to
wear. A regular replacement of the parts every 1
1
/
2
years or when these parts
are worn, will ensure, that you are getting the close, comfortable and quick
shave you expect from your Braun shaver.
(Shaver foil and cutter block: part no. 3600)
• Press the release buttons, take off the shaver foil. Replace the new shaver foil
in the right direction until it locks in place.
• To remove the cutter block, lift it off (g).
• To replace the cutter block, snap onto the holding studs.
4.3 Preserving the rechargeable batteries
• In order to optimise the capacity and life of the batteries, the shaver should be
fully discharged through regular use every 6 months approximately. Then
recharge to full capacity again. This reconditions the rechargeable batteries.
• Do not expose the shaver to temperatures of more than 122 °F / 50 °C for long
periods of time.
5 Environmental notice
This appliance is provided with nickel-hydride rechargeable
batteries.
These do not contain any harmful heavy metals. Nevertheless,
in the interest of recycling raw materials, please do not dispose of
this appliance in the household waste at the end of its useful life.
Disposal can take place at a Braun Service Center or appropriate
collection sites.
Subject to change without notice.
Tips for the perfect shave
• We recommend that you shave before washing, as the skin tends to be
slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin.
• Stretch your skin and shave against the direction of beard growth.
• Replace the shaver foil and cutter block every 1
1
/
2
years, or when the parts
are worn, to ensure optimum shaving performance.
3615/12_NA Seite 7 Donnerstag, 24. Oktober 2002 2:02 14

Braun InterFace Excel 3770 Specifications

General

Brand	Braun
Model	InterFace Excel 3770
Category	Electric Shaver
Language	English