What to do if my Braun Blender does not operate?
If your Braun Blender isn't working, first ensure that it's receiving power by checking the fuse or circuit breaker in your home. Also, make sure the pitcher is correctly attached to the motor body, with the handle on either the right or left side.
Why is liquid splashing out of my Braun Blender pitcher?
If you notice liquid splashing out of the Braun Blender pitcher, it could be due to overfilling. Make sure you are not exceeding the maximum quantity recommended. Also, verify that the speed you've selected isn't too high by checking the speed recommendation.
Why is liquid splashing out of the Braun JB 7192 Blender's pitcher?
If liquid is splashing out of your Braun Blender's pitcher, it could be due to overfilling or using a speed that's too high. Make sure you're not exceeding the maximum recommended quantity and that you're using the appropriate speed setting.
What to do if my Braun JB 7192 Blender pitcher is leaking?
If the Braun Blender pitcher is leaking, inspect the gasket to ensure it is correctly mounted and in the right order. A loose or torn gasket can cause leakage.
How to fix a leaking Braun JB 7192 pitcher?
If your Braun Blender pitcher is leaking, examine the gasket to ensure it's correctly mounted and in the proper order. A loose or torn gasket can cause leakage.
This document provides instructions for the Braun Jug Blender, a versatile kitchen appliance designed for various food and beverage preparations. It covers models Type 4142, 4143, and 4144, including the JB 7192, JB 7130, and JB 7000.
The Braun Jug Blender is primarily used for blending, chopping, mixing, pureeing, liquefying, and crushing ice. It features a motor body, a main pitcher, and a Smoothie2Go attachment for individual servings. The blender offers multiple speed selections, including a pulse mode for controlled processing and a dedicated crush ice button for automated ice crushing.
The main pitcher is suitable for preparing larger quantities of ingredients, while the Smoothie2Go attachment is specifically designed for drinks and smoothies, allowing users to blend and take their beverages on the go. The appliance is designed for household use and is not intended for commercial or industrial applications.
Before first use, all detachable parts should be cleaned. The power cord can be uncoiled from the storage compartment at the bottom of the motor body. To operate, the appliance must be plugged in, and the On/Off button pressed. The On/Off button will illuminate, and other indicator lights will flash, signifying that the blender is in ON mode but no speed is selected. If no speed or mode is selected within 5 minutes, the appliance will automatically turn off.
To assemble the pitcher, ensure the blade gasket is positioned on the inside rim of the blade group. Carefully place the blade group into the locking ring and screw the blade assembly to the pitcher in a clockwise motion until secure. The pitcher is then positioned on the motor body by aligning the line on the locking ring with the front of the user and pushing down until it locks into place. The pitcher handle should be on either the right or left side of the motor body.
For optimal blending, liquid ingredients should be added first, followed by solid ingredients, to ensure uniform blending and prevent motor stress. The complete lid, including the measuring cap, must be firmly placed on top before operation. During blending, additional liquids can be added through the drip hole in the measuring cap. To stop blending, press the pre-selected speed button. To switch off the appliance, press the On/Off button and unplug the blender before removing the pitcher.
When blending hot foods or liquids, the complete lid (including the gasket and measuring cap) must be placed on the pitcher. Do not fill the pitcher beyond 24 fl. oz. (3 cups) for hot foodstuff. For larger amounts, ingredients should cool to room temperature, and the pitcher should not be filled beyond 48 fl. oz. (6 cups). Blending very hot ingredients can result in hot liquid and steam being forced past the lid, causing severe personal injury.
The Smoothie2Go attachment must only be operated with its special blade group (grey) and is exclusively for preparing drinks and smoothies. It should not be used to blend hot foods or carbonated liquids. To assemble, ensure the blade gasket is positioned on the inside rim of the blade group. Hold the blade group at the coupling from underneath and place it upside down in the cup. Screw the locking ring blade assembly to the cup in a clockwise motion until it can go no further.
To blend with the Smoothie2Go, fill the cup with ingredients, adding solids first, then liquids. Carefully place the blade group with the gasket onto the cup and screw the locking ring clockwise until secure. Turn the cup upside down, position the line on the locking ring in front of the user, and push the cup down until it is securely locked into place on the motor body. After blending, turn the cup upright and unscrew the blade assembly. To attach the lid, ensure the gasket is inside the rim of the lid and twist clockwise, then carefully close the drinking spout.
The blender offers various speed selection buttons (9) and a pulse button (8).
For best results, solid ingredients should be cut into small pieces (1 inch). Always start by mixing solid ingredients with a small amount of liquid, gradually adding more liquid. When pureeing solids, feed small portions into the pitcher gradually. If blending stops or ingredients stick to the sides, there may not be enough liquid. Use pulse mode for solid or highly viscous ingredients to prevent the blade from becoming stagnant. For small amounts of foodstuff, use a low speed level. Oil can be added through the drip hole in the measuring cap when preparing mayonnaise. Avoid bumping or dropping the blender during operation. It is recommended to keep a hand on top of the pitcher when operating. Do not fill the pitcher beyond 32 fl. oz. (4 cups) when preparing milk-based drinks.
Before cleaning, always disconnect the power.
It is suggested to save all packing materials for future shipping needs. Keep all plastic bags away from children. The cord storage compartment (11) at the bottom of the motor body allows for neat storage of the power cord.
The manual includes a troubleshooting guide for common issues:
General| Power | 1000 W |
|---|---|
| Capacity | 1.6 L |
| Material | Plastic |
| Pulse Function | Yes |
| Blade Material | Stainless steel |
| Ice Crushing | Yes |
| Material Jar | Glass |
To Next Page