Page 33
Open
(Down)
Close
(Up/Stop)
E
Using hand pump handle:
a. Place slotted end of pump handle
onto back-up pump release valve
and turn clockwise to close
securely. See Photo D.
Note: Valve must be tight, but do
not overtighten.
b. Insert handle into back-up pump
and stroke until platform reaches
floor level (see Photo E).
To Fold Platform (In):
Insert handle into back-up pump and
stroke until platform stops (folds
fully). See Photo E.
Manual Operating Instructions
UP
• To Fold Roll Stop:
• To Raise Platform:
D
Refer to photos and illustration of
release valve on page 31.
Note: Close back-up pump release
valve securely before operating
electric pump.
To Next Page