Page 28
TO FOLD PLATFORM:
CLOSE DOOR(S)
Lift Operating Instructions
2. Press red UP switch
until platform stops (reaches
oor level). Release switch.
Switch Arm Switch: Slide
knob out to UP position.
Note: Roll stop must be UP
when raising platform. Roll
stop must be UP and roll stop
latch must be fully engaged.
UP
O
P
3. Unlock wheelchair brakes and
load passenger from platform
into vehicle. Note: Lower
head to clear door jamb
header.
Press FOLD (orange IN)
switch until platform stops
(fully folded). Release switch.
Automatic Door Operator(s):
Press yellow CLOSE
switch until door(s) are fully
closed. Release switch.
Manual Door(s):
Manually close door(s) fully.
Q
R
S
T
U
To Next Page