Braun MultiServe KF 901AN - Brewing Over Ice Coffee

16
EN Brew over – ice coffee FR Brew over – ice coffee ES Brew over – ice coffee
1. Press the On/Off button.
2. Place the lever (E) in position “Coffee”.
3. Fill water in the water reservoir.
4. Fill your desired carafe/cup half with
ice cubes and place it below the filter
basket.
5. Select the beverage size (F).
6. Press the “Over Ice” button.
7. Select the Bold brew mode to start
the brewing cycle.
8. The selected brew mode and the On/
Off button (H) are illuminated conti-
nously during the brewing process.
9. The unit will beep when the brew
is complete and the selected brew
mode and “Over Ice” turn off.
10. Place the lever (E) in position “Drip
Stop”.
1. Press the On/Off button.
2. Place the lever (E) in position “Coffee”.
3. Fill water in the water reservoir.
4. Fill your desired carafe/cup half with
ice cubes and place it below the filter
basket.
5. Select the beverage size (F).
6. Press the “Over Ice” button.
7. Select the Bold brew mode to start
the brewing cycle.
8. The selected brew mode and the On/
Off button (H) are illuminated conti-
nously during the brewing process.
9. The unit will beep when the brew
is complete and the selected brew
mode and “Over Ice” turn off.
10. Place the lever (E) in position “Drip
Stop”.
1. Press the On/Off button.
2. Place the lever (E) in position “Coffee”.
3. Fill water in the water reservoir.
4. Fill your desired carafe/cup half with
ice cubes and place it below the filter
basket.
5. Select the beverage size (F).
6. Press the “Over Ice” button.
7. Select the Bold brew mode to start
the brewing cycle.
8. The selected brew mode and the On/
Off button (H) are illuminated conti-
nously during the brewing process.
9. The unit will beep when the brew
is complete and the selected brew
mode and “Over Ice” turn off.
10. Place the lever (E) in position “Drip
Stop”.
1:1
Interface
Multiserve
A01 27.6.2018 Markus Orthey
180627_Multiserve_PG_interface
NOTE: Be sure the cup size fits to the
selected beverage size. Never fill ice
cubes in the water reservoir.
We recommend using the carafe or a
thermo-resistant glass.
NOTE: Be sure the cup size fits to the
selected beverage size. Never fill ice
cubes in the water reservoir.
We recommend using the carafe or a
thermo-resistant glass.
NOTE: Be sure the cup size fits to the
selected beverage size. Never fill ice
cubes in the water reservoir.
We recommend using the carafe or a
thermo-resistant glass.
BRAUN_UI_KF9050_BK_-_KF9070_SI_V09.indd 16 21.02.19 15:15