Braun NovoScan I - User Manual

Questions and Answers

A
Aaron Brown DVMAug 19, 2025
How to fix a 'device not recognized' error for Braun NovoScan I?
- D
  David BryantAug 19, 2025
  If your computer doesn't recognize the Braun Scanner image copier and shows a "device not recognized" message, it might be because the image copier isn't plugged into a high-speed USB port. Your computer needs a USB 2.0 to communicate with the image copier. Check if USB 2.0 is installed. If not, you can upgrade your USB ports; this hardware is available at most electronic stores.
V
vjohnsonAug 21, 2025
What to do if my computer does not recognize the Braun NovoScan I?
- V
  vingramAug 22, 2025
  If your computer doesn't recognize the Braun NovoScan I and displays a "device not recognized" message, it might not be plugged into a high-speed USB port. The Braun NovoScan I requires a USB 2.0 port to communicate properly. Verify that your computer has USB 2.0 installed. If not, you can upgrade your USB ports by purchasing the necessary hardware at most electronic stores.
D
Diana RobinsonAug 25, 2025
What to do if my computer won't recognize my Braun NovoScan I even with a USB 2.0 port?
- R
  Richard BarronAug 25, 2025
  If your computer doesn't recognize your Braun NovoScan I despite having a USB 2.0 port, it's possible that not all ports on your computer are high-speed. Even with USB 2.0 installed, some USB ports may not be USB 2.0 compatible. Check all your USB ports to identify the 2.0 compatible ones.
K
Kayla SanchezAug 26, 2025
Why am I having trouble loading the software or driver for my Braun NovoScan I?
- S
  sanchezsarahAug 26, 2025
  If you're having trouble loading the software or driver, it could be due to an incompatible operating system. Ensure that your computer is running either Windows XP or Vista.
P
pauljordanAug 27, 2025
Why do my slides look overexposed with my Braun NovoScan I Scanner?
- L
  lawrencepetersonAug 28, 2025
  If your Braun Scanner image copier works fine, but some slides or negatives look overexposed, it might be due to the auto exposure time varying with your computer's configuration. The image copier adjusts automatically. Allow the live view window to finish adjusting the exposure before clicking “Capture”. Also, the slides or negatives might have been overexposed during development. You can use the MediaImpression software to improve the image quality.
J
Jacob NelsonAug 30, 2025
What to do if my Braun Scanner software says it will expire?
- S
  Steven PittsAug 30, 2025
  If you see the message 'Your software will expire in XX days' while using your Braun Scanner, it means you likely downloaded a trial version of MediaImpression from the ArcSoft website. To resolve this, uninstall the downloaded MediaImpression and reinstall the software from the CD that came with your scanner.
C
Christopher DavisAug 31, 2025
What to do if Braun NovoScan I installation disc will not auto start?
- A
  Antonio SmithSep 1, 2025
  If your installation disc for the Braun Scanner won't auto-start, the problem might be with the CD itself or your CD drive. Check if your CD drive is working correctly. If possible, test the disc on another computer. Also, some antivirus systems might block the auto-start; in that case, install the software manually.
C
Christian GriffinSep 3, 2025
How to remove black edge in Braun Scanner preview?
- C
  chanbrianSep 3, 2025
  If you find a black edge in preview mode on your Braun Scanner, it might be because the slide is not in the central position within the holder. To fix this, tilt the scanner left or right to allow the slide to slip slightly, then check the preview photo again.
J
Jillian PerezSep 4, 2025
Why my Mac computer does not work with Braun NovoScan I copier?
- C
  Christian SchmidtSep 4, 2025
  If your Mac computer isn't working with the Braun Scanner copier, it could be due to an outdated operating system. If your Mac OS is version 10.4 or below, it may not support UVC. Please upgrade to the latest version 10.4.11 or above.
A
Angel ZunigaSep 7, 2025
How to fix black edge in Braun NovoScan I photo?
- D
  denise48Sep 7, 2025
  If you see a black edge when viewing a photo scanned with your Braun Scanner, it's likely due to film or slide size tolerance. You can crop the photo using software. For detailed instructions, refer to the “Edit the picture” section, specifically point “1.4 Crop” in this manual.