15
Troubleshooting Guide
Problem Potential Causes Solution
Blender does not
operate.
Plastic jug:
Jug is not attached properly.
Glass jug:
Jug is not attached properly.
Check the position of the jug and the lid.
Place the jug with the handle on the right
or left side on the power base.
Then rotate it until it is fully locked.
Jug is leaking.
Glass jug:
Gasket is loose, or even torn.
Blade assembly is not tightly screwed to the jug.
Check if gasket is mounted properly and in the
right order.
Screw the blade assembly correctly to the jug.
Liquid splashing
out of the jug.
Jug is overfilled. Check maximum quantity recommendation.
Speed selected is too high. Check speed recommendation.
5722310494_JB31xx_JB32xx_KR.indd 155722310494_JB31xx_JB32xx_KR.indd 15 19.12.19 08:4119.12.19 08:41
To Next Page
Loading...
