Braun SensorAir BFD104B User Manual

12
13
The Pre-Filter should be cleaned once every 3 months. The Pre-filter does not have a
separate electronic filter indicator and should be cleaned based on the ECO filter schedule.
Cleaning & Drying the Mesh Pre-filter
Turn the power off and
unplug the air purifier.
4
2
1
1 2 3
Remove the Back cover with
mesh Pre-filter from the air
purifier.
The pre-filter can be shaken
over a trash can or
vacuumed clean.
4 5
6
Alternatively, the Pre-filter can
be rinsed by hand under warm
water to clean.
Shake the filter to remove
any excess water.
Allow the Mesh Pre-filter to dry
for a few hours or overnight.
CAUTION:
•
NEVER place a wet Mesh Pre-filter in your air purifier.
•
DO NOT place the Mesh Pre-filter in a dishwasher
or subject it to other extreme hot water conditions.
•
DO NOT use any solvents, strong cleaning agents
or flammable liquids to clean the Mesh Pre-filter.
7
When the Mesh-Pre-filter is
completely dry, place it back
in the air purifier.
Replacing the Odor & VOC Filter
Ensure the air purifier is unplugged from the wall outlet before replacing the filter.
The Odor & VOC Filter should be replaced once every 6 months to ensure its performance.
Turn the power off and unplug
the air purifier.
2 3
4
2
1
1
Remove the air purifier front
cover.
Remove the used Odor &
VOC Filter.
5
4
Remove plastic bag from
the new Odor & VOC Filter.
Install the new Odor & VOC
Filter in the unit.
6
Return the front cover to its
original place.
8
4
2
1
7
Plug the unit into the power
outlet. When the unit is off,
press and hold the alert reset
button for 2 seconds. The filter
indicator will flash twice and
shut off.
2sec

Braun SensorAir BFD104B Specifications

General

Brand	Braun
Model	SensorAir BFD104B
Category	Air Cleaner
Language	English