9
from the right on the camera base. If you
wish to film
single frames
without
using
the automatic
single frame mechanism,
you can shoot each frame by operating the
cable release once.
In
this case, the red
triangle
mark
on filming speed switch 2
must be turned to coincide with the
first
black square next to the red dot.
•
•
timer
If the camera base
is
to rest
directly
on the
tripod
head, the handgrip containing the
batteries must be swung away.
In
this case,
the outside
power
supply
will
be needed
(see section
«Nizo Power Set»).
Electric remote release
Instead of a wire cable release, the camera
drive mechanism can
also be operated by
means of a Nizo remote
release cable
(available
as
an
accessory). This actuates
Co
nne
c
tion
for
pytp
n."nn
le
ad
!;;::::::~
RE
~
l
e
,
"
s
e
button
an
electromagnet
installed inside the ca-
mera body, and can
also be used
for
manu-
ally controlled
single
frame filming. The
master switch must first be moved to the
red
dot
position. The
electric
remote re-
lease comprises a
10
m (33 It) reel of
cable, only 1.2 mm (0.05 in) thick, a push
button release and a
connection
for
attach-
ing another 10 m
(33
It) of extension cable.
If necessary, several reels of cable can be
connected
together
so
that
the camera can
be operated from a maximum distance of
100
m (330 It) away.
The
electric
remote release permits filming
with a concealed camera,
or
shots in which
the cameraman himself appears
on
the
screen. The camera should be set up ri-
gidly
- preferably on a tripod - in
front
of
the scene to be filmed, the scene should
be
correctly
framed by operating the zoom
lens, and the exposure control set to
«automatic». The
electric
remote release
plug should be inserted in the second
socket to the
lelt
of the carrying loop. The
connection
for
further
reels of extension
cable is located on the remote release reel
next
to the push button release.
Conn
ec
tion
for electric
remot
e release
To Next Page
Loading...
