What to do if BraunAbility Turny HD Turny stops with red blink?
If the Turny Mobility Aid by BraunAbility stops with a small reverse movement and you see 1 red blink, it may be due to a power surge or the pinch protection being activated. Check for any obstacles that may be in the way and reactivate the Turny.
How to fix BraunAbility Turny HD Mobility Aid with no diode lit?
If no diode is lit on your BraunAbility Mobility Aid, it could be due to several reasons. The vehicle's engine might be on, or the door might be closed, or there could be an interruption in the power supply. Try switching off the ignition and check the fuses and cables to ensure they are intact. For further assistance, it is recommended to contact your installer.
General| Brand | BraunAbility |
|---|---|
| Model | Turny HD |
| Category | Mobility Aid |
| Language | English |
Key safety precautions for operating the Turny seat lift, including weight limits and vehicle stability.
Details on the function and use of the Turny's hand control unit for operation.
Instructions for rotating the Turny seat outwards and inwards for user access.
Instructions on how to raise the Turny seat for user positioning.
Procedure for manually raising the Turny Orbit/HD in emergency situations.
Steps to manually rotate the Turny Orbit seat inwards during an emergency.
Guidelines for cleaning and annual servicing of the Turny seat lift.
Explanation of hand control error messages and their corresponding causes and actions.
Detailed technical specifications including dimensions, weight capacity, and electrical requirements.
A welcome message and guidance for users to ensure a secure and comfortable experience.
To Next Page